X-RAY Inspection Machine
Detailed
■ Equipment advantages
- The world's top Hamamatsu (HAMAMATSU) microfocus X-ray source is adopted, which has a long service life and no maintenance.
- The image detector can be tilted 45° to the left and right to observe the sample defects from a unique perspective without interference or dead corner detection.
- It can detect defects below 2.5 microns, and the detection accuracy is high. It can easily identify the bending and fracture of gold wire in semiconductor packaging.
- Super large worktable (520MM*520MM), can place super large industrial control motherboard, super long LED light bar, suitable for a variety of fields of electronic products.
- The super large automatic navigation window can move the stage to the indicated position with mouse click, so as to quickly find the defects of the items and improve the detection efficiency.
- The editable detection program can realize CNC automatic detection, which is suitable for large-scale detection, improve the detection efficiency and automatically judge NG products.
- This product has obtained the exemption certificate, radiation safety is guaranteed, and users can be exempted from: occupational health examination of operators, participation
- The Nuclear Technology Utilization Radiation Safety and Protection Assessment includes supporting work such as obtaining evidence for employment and placing equipment in specific areas.
■ X-RAY Inspection Machine Parameters
X ray tube (Higashibara,Japan) | Type | Closed, micro-spots |
| Tube voltage | 90KV | |
| Tube current | 200μA | |
| Size of the spot | 5μm-15μm | |
| Maximum input power | 8W | |
| X-ray beam angle (cone) | 80 degree | |
| Amplified factor | The geometric magnification is 150 times and the system magnification is 1500 times | |
Flat panel detector (Yi Rui) | Type of probe | Amorphous silicon flat panel detector |
| Image area | 130mm×130mm | |
| Size of photosensitive unit | 85μm | |
| Pixel matrix | 1536×1536 | |
| The tilt Angle of the probe | 0-90° Angle (45° on each side) | |
| Resolution ratio | 5.8Lp/mm | |
| Image frame rate (1x1) | 20fps | |
| Software | Function | Bubble measurement, size measurement, batch testing or other custom functions |
| Intellectual property right | Independent research and development, with independent intellectual property rights of software | |
| Shielded cell | Material quality | Steel + lead + steel plate, sandwich structure shielding box, effective isolation of radiation |
| Safety | The radiation dose equivalent rate <0.5μSV/H is higher than the international standard. | |
| Size | L1500mm *W1300mm* H1800mm | |
| Weight | About 1500Kg | |
| Insurance | Safety interlock function | When the safety door is opened, the light tube cannot be opened. When the light tube is opened, the automatic lock is locked and the safety door is closed. |
| Electromagnetic switch protection function | The observation window is equipped with an electromagnetic switch. When the X-ray tube is in working condition, the observation window cannot be opened. | |
| Visible window | It has a visible transparent window, which makes it easy to observe the sample directly from the window during the operation of the equipment. | |
| Emergency stop switch | The emergency stop switch is located in a prominent position on the operation table and equipment body. In case of emergency, press the emergency stop switch to quickly cut off power. | |
| Automatic protection function of light pipe | After 5 minutes without any operation, the light tube will automatically cut off power and enter the protection state. | |
| Radiation safety standards | The steel-lead-steel protective structure is independently produced, and the front door window is made of lead glass. At any position of 20mm of the equipment. | |
| The tested radiation amount is less than 0.5μSV/H, and higher than the international standard is less than 1μSV/H. | ||
| Automatic protection function of the equipment | Once any door or window of the equipment is opened, it will immediately close the light tube and enter the shutdown protection state. |
Keywords:
Hardware
X-RAY Inspection Machine
Previous page：
Next page：
Get A Quote
Please fill in your phone number and E-mail information and we will contact you as soon as possible
Our Services
Our main business is the independent development, production and sales of SMT online MES, smart reel racks/smart moving trolleys/SMT peripheral smart devices
Hot Line
Products
Contact Us
Address
20th Floor, Building 8, Lane 231, Greenland Avenue, Huaqiao Town, Kunshan City, Suzhou City, Jiangsu Province
Tel
Copyright © 2025-2028 Jumicro MES System Integration (Shanghai) Co.,Ltd All Rights Reserved. IPV6